Tripod leg locks

I keep reading differing opinions on leg locks.  It is a matter of taste.  I've used both flip locks and twist locks.  I like both, but I can offer some comments based on my experiences.

Flip locks are fast, and it is easy to see if they are locked or not.  With my old Bogen 3221, I had to keep a tool handy to tighten the screws because they would periodically loosen.  I was unable to use the tripod until I fixed the loose screws.  Also, I have caught branches and such on the flip locks.  I expect that years later, flip locks have improved where the problems I had aren't problems anymore, but it is bound to depend on the design.

When I switched to a carbon fiber Gitzo 3530 years ago, I thought I wouldn't like the twist locks, but I got used to them within a couple of days and haven't given them any thought since.  Speed hasn't been an issue since I can loosen all of the screws on a single leg with a single twist, and re-tighten them similarly once collapsed again.  They have never caught on any branches.  They are easy to clean.  They never need adjustment.  Visually seeing if they are locked or not hasn't been an issue for me; I feel when they are tight or loose.  Also, the Gitzo ALR feature really does work, and I assume most other brands that use twist locks have a similar feature... it helps prevent collapse even if the legs aren't totally tight.

The f-stop Loka backpack review

Update:  I found some wear on the bottom of the Loka in the bottom front corners.  I had decided the Loka wasn't large enough for longer hikes in the mountains and I was cleaning up the bag to sell it to get a larger f-stop bag when I noticed the trouble.  Given the 20 year warranty, I decided to see what f-stop would do about it.  At first they claimed they could not find my purchase information, then later they claimed the damage was abuse (if setting the bag down gently is abuse, then I'm guilty).  Basically, the 20 year warranty is a farce, their customer service has gone further down the tubes, and I will never purchase anything of theirs again.

I "fixed" the bottom of the bag with some Tear Mender, then covered that with some rubber spray.

If that hasn't scared you off, read on.  The design idea is good at least.

I've used a number of camera bags of various brands and styles: Shoulder bags, beltpacks, slings, and backpacks. Given that I hike and tend to do a lot of nature photography, I mostly use backpacks. I have young kids. We moved to the mountains. We hike. Sometimes my wife has to carry our youngest and I end up being the pack-horse for everything else. Put those things together, and I found I needed room in my backpack for more than just photo gear. I have to think about things we really need in the mountains that I never worried about at sea level, such as layers of clothing and additional water. I investigated several brands, but ended up with a f-stop Loka, part of their mountain series of bags. I found it when I started looking for a backpack that had a good harness and could carry more than just camera gear. It is a daypack that doesn't scream camera bag, with about 37L total volume.  

Comfort

The Loka has an OK harness.  It has an internal frame, adjustable straps and padded waist belt. I can adjust it quickly if I change the layers I wear during the day. The hipbelt is sewn on and not stiff enough to support a heavy load.  As long as it is adjusted properly, it fits decently.  However, to use the load lifters properly, the bag needs to be taller.  The lifters go straight out, perpendicular to my back rather than come down from above at a 45 degree angle.  

Access

I really like the rear camera access.  The straps never go in the dirt/snow/mud!  I may get the back of my car dirty or wet, but not my clothes.  It is also secure from pickpockets.

Another thing I've done with the Loka is change lenses without setting the bag down.  One can loosen the belt and swing the backpack to the front, open it, change lenses, zip it back up and put it back on, all while standing in water, etc.  It's slower than just setting the bag down, but it is a useful option to have.

Versatility

A feature that gives f-stop mountain series backpacks great versatility is the interchangeable camera compartments, which F-stop calls the Internal Camera Unit (ICU).  The ICUs let you pick the size you need for your gear, and use the leftover space for non-photo gear as desired.

The large ICU is great when I don't have to think about non-photography items. I can carry all 4 of my lenses with ease, and leave the lens hood mounted on my 100-400, making it fairly quick to get setup.  Of course, I don't have room for a fleece jacket when I use the large ICU. But I can still carry snacks, water, sunscreen, hat, bug repellent, Leatherman tool, flashlight, and a first aid kit.

The Large Pro ICU

Using the medium ICU means I have to store the lens hood reversed on the 100-400, and if I carry all 4 of my lenses, the 100-400 must be mounted on the camera while everything is in the bag.  But of course I can add a nice fleece jacket to my survival gear, and this is now my normal use case.   I gave up some convenience (namely, the ability to store the camera with any of my lenses mounted) for space savings.  Even in summer in the mountains, the fleece has proven useful, particularly at a waterfall waiting for the right light.

The Medium Pro ICU

The small pro ICU half the size of the large pro and is good for 2-3 shorter lenses and filters, memory cards, and batteries.  It can fit a mounted 100-400 or 70-200 sideways, but I found that the weight above will compress the ICU if it doesn't have a vertical support inside the ICU.

The Small Pro ICU

What would I do differently? Too late now, but if I were designing a system like this from scratch, I'd like a wider ICU to better handle the big modern DSLR lenses with hoods attached. Then again, once I go mirrorless it won't be an issue.

A downside of the ICU design is that small items can and will fall down the sides of the bag, between the shell and the ICU. I have to put these small items into bags to avoid the problem.

Other details

Behind the ICU is a spot for a hydration system, up to a 3L model. There is a slot for the tube to come out of the back, and tie-downs to hold the end on the shoulder strap within reach. I don't use this feature, but it should appeal to many hikers.

The mesh pockets on either side can fit a water bottle each, which I can reach without taking the bag off.

There is an exterior pocket meant for a light jacket; I use it for a rain shell.

The underside has a spot for a rain cover (the newer models are better sealed for weather and may not need a rain cover as often as the Loka).

The top lid has pouches on top and bottom of the lid. I use these for my flashlight, small tools, etc.

The inside of the main opening has thin pouches for filters, memory cards, etc.

What else do I like? I like the compression straps on the back and sides; I've used them to carry my tripod, as well as my daughter's stuffed animals.

The most important accessory!

Cons

F-stop as a company has a lot of difficulty with supply. Normal wait times are 4-6 weeks and I know this has put off a lot of potential buyers.  Even years after I bought the Loka, they still have problems getting items to customers right away.  If you like the design, the only solution is to be patient.  But, at the time of purchase, they were been up-front with me whenever I talked with them, and when I told them of an upcoming trip, they were kind enough to expedite the shipping. 

I wish the front stash pocket expanded more.  It is tight once I stuff a thin rain jacket inside.  I believe this pocket is bigger and easier to access on the replacement pack, the Ajna.

I wish the mesh side pockets were just a tad (1") taller to better hold my tall 18 oz water bottle.  I've had the water bottle fall out when I set the bag down once, and the lid can hit rocks.

The medium ICU tends to pop out on one side, and it is worse when I use the front stash pocket. It isn't a show-stopper but it does annoy me. The best fit is really the large ICU, but I often want more space for other gear!

The small pro ICU will compress from the weight above it if you don't use the dividers for vertical support (such as when I stored my 100-400 mounted sideways in it).

It needs a deeper lumbar pad.

The Loka needs to be a couple inches taller for the load lifters to do much good.

I wish the shoulder straps had additional padding; it is possible to overload the Loka.

I wish the back panel had better airflow; it can get sweaty. I wish both the shoulder straps and hipbelt had mesh.  I realize the material they used is meant to repel snow, but I use it in all seasons and having sweat wick away would be better for me most of the time. 

Summary

The Loka was my first decent backpack due to the hipbelt support, but I've found many packs since then that are far more comfortable.  

As I write this, I've had the Loka for a couple of years and f-stop has discontinued the Loka model.  The current similar models are the 32L Lotus and 40L Ajna.

The Mountainsmith Descent sling bag

I recently bought a Mountainsmith Descent sling bag to replace my older beltbag.  My old beltbag is well-made (still working like new after over 20 years), but the waistbelt is difficult to adjust when I change layers, and I thought a sling would be easier to use.  My main use for a smaller bag like this is casual urban outings where I don't want to carry more than 1-2 lenses, I'm not hiking far, or I'm just close to the car.  For hikes, I still use a nice backpack.

I looked at other beltbags and slings, but ended up with Mountainsmith as it came recommended from a friend, had the space I wanted, and was on sale for a good price.

So here are my impressions of the Descent:

The exterior grey color is nice, discrete, and professional-looking.  The interior color is yellow, which makes finding dark objects in the bottom pretty easy.

It is well-made, with very thick padding.  If anything, it has a little too much padding around the camera compartment.  As it is brand new, the padding and zipper is a bit stiff.  I expect this will break in over time.  I can't see any reason why the bag won't last for years.

It's fairly comfortable as slings go, but I wouldn't want to overload it.  I am not the world's biggest fan of slings.  In general, I prefer backpacks for the even distribution of weight.  However, for lighter loads, casual use, and quick access, it seems pretty nice.  

It has a secondary strap to keep it from shifting/sliding while slung on your back.  Grips on 3 sides help you move it front to back.

The Descent is big enough to hold my Canon 100-400 mounted (hood reversed) on a Canon 5D3.  This is a big advantage for me over the beltbags I know about, which generally won't fit the 100-400 mounted.  While the Descent can carry 3 wide (77/82mm filter sizes) lenses including the 100-400, with any of them mounted, I think it is more comfortable for 2 big DSLR lenses plus accessories.  Again, I don't plan to load it up with quite that much at once, but having options is something I appreciate.  It has a little extra room which I can use for filters and other accessories.

For reference, Mountainsmith says the interior is 14.25" x 10.75" x 5". The exterior is 15" x 11.5" x 5.75".

The design makes it possible to change lenses in the bag while slung around to my chest.  It is still easier for me to set a bag down to do lens changes, but I imagine I'll get faster with the sling style over time.

The Descent came with a hidden bottom pouch and a rain fly.  That will be handy if I'm caught in a downpour.

The front organizer pocket seems a bit thin.  I hope it stretches out just a little.  In theory, it will hold a medium tablet, pencils, and other thin items like a phone.

Overall I like it.  I'll stick with a bigger backpack for hikes of course, but this will serve me well otherwise.

RAW file conversion - what matters?

When I first converted to digital photography from film, I researched every RAW converter/photo editor I could find. And even though I looked hard at alternatives, Adobe Photoshop was the best overall converter and editor for me.  I sold a pretty nice lens to pay for it. Photoshop does nearly everything well, even if the interface isn't the easiest to learn.

I confess, I was pretty upset when Adobe decided to go with a subscription model.  I knew right away that wasn't going to work for me.  I'm an amateur.  I don't get paid.  I do photography for fun, but I don't do it every day.  

So I started researching alternative RAW converters.  The following information took me at least a year to gather.

I tried several, both paid and free: 

• Aftershot Pro (formerly Bibble), 
• Capture One,  
• Canon's DPP4 (only for Canon users),
• DarkTable 1.2.x (Linux/Mac only - I use Windows so I ran it in Linux via VirtualBox),
• DxO Optics Pro 9, 
• LightZone 4,
• Photo Ninja 1.2.5,
• RawTherapee 4.x,
• Photivo, 
• SilkyPix

I thought about Lightroom but I'm not sure I trust Adobe to keep that one free from subscription.

Some converters are easier to learn (and some have difficult learning curves), some are faster, some have nicer defaults than others, etc.  Some try to do everything, some do nothing automatically.  After months of experimentation, I came to realize I only cared about a few features:

• White Balance/Color space
• Highlight/Shadow recovery/Exposure
• Noise Reduction
• Lens corrections (if needed)
• Usability/speed

One of the things I have realized about these programs is that good or bad looking defaults don't tell you how well the program does using "best" settings.  Finding those best settings can take quite a bit of time and patience.  I am not convinced that I have learned how to get the best from each of the converters I've tried.

Some of the converters let you select from several demosiacing algorithms.  In practice, I found little difference between them.

I ruled out Lightzone because it seems to be missing a bunch of basic features, yet has a ton of fancy filters I don't care about.  I have not found a way to fix blown highlights.

White Balance/Color Space

Every converter can adjust white balance and color.  I think all of them have a spot tool where you can specify any region as neutral, and the app adjusts the color for the rest of the image based on that.  Most of the converters produce a decent default white balance, and I confess, that is an area where I struggled with Adobe in certain cases.  Every time I struggled with the white balance and color, I seemed to end up using DPP.  However, once I started playing with Photo Ninja, I found it really easy to make the colors either accurate, or have a nice 'pop' that for me is more difficult in the other converters.  I have played with RawTherapee more than most other raw converters, yet still find it very difficult to get the right color from it, and gave up on it for now.

I nearly gave up on Photivo early on due to a steep learning curve, but I gave it more time and got to learn the interface.  I found Photivo slower than most of the others, yet quite capable... until I realized it has limited color space options, and no matter what settings I have used, the saved TIFF looks very different from the preview in Photivo itself.  I do not have that problem with any other converter, so I know it isn't a calibration problem.  I tried adding ICC profiles for the color space(s) I wanted, and didn't see any benefit.  That was a showstopper, and eventually I threw in the towel on Photivo.  I hope they fix that in the future.  If they do, I will certainly give it another shot.

Highlight/Shadow recovery/Exposure

Highlight and Shadow recovery is a difficult problem.  The best highlight recovery I have seen is in Adobe, DxO, recent versions of Photo Ninja, and DPP (requires some fiddling in DPP4). The DPP4 highlight recovery is trickier than some; move the middle slider in the gamma adjustment curve if the normal highlight slider isn't good enough.   RawTherapee and Photivo defaults didn't work that well, but changing the blending mode gave me decent results in each of those two. DarkTable was pretty bad in the sample I tried (1.2.x), and was unable to recover any highlights regardless of settings.  That knocked DarkTable out of the race.  Likewise, I wasn't able to figure out how to do highlight recovery in Lightzone.

Noise Reduction

Most of the converters I tried did a very good job with noise reduction.  It isn't a distinguishing factor for me anymore.

I experimented with their various sharpening methods, and came to the conclusion that most of the time, I don't like capture sharpening, so that became mostly a non-issue.  If it is an issue for you, then I suggest you take a close look at DxO, DPP4, and Photo Ninja, which are superior to the rest.

Lens corrections

For lens corrections, I rate DxO the best (truly outstanding!), followed by Adobe, DPP, and Photo Ninja.  RawTherapee in theory can use Adobe LCP files, but somehow never seemed to handle CAs (Chromatic Aberrations) well.

I really like DxO, but after my trial period, I realized I had to pay more for the Elite version just because of the camera model I happen to own.  That bugged me and I decided it wasn't worth that much money over DPP, which is free.  But it has a lot of features and fantastic lens corrections available.  DPP only has corrections for Canon lenses, of course.  Photo Ninja appears to have more manual controls rather than lens profiles, but seems to also do a great job for my lenses by default, when needed, so I guess there are things happening under the hood based on the lens/camera detected.

Usability/Speed

Usability is clearly a matter of taste, but it is important enough to me that I had to mention briefly what I like and don't like.

Speed is more important perhaps. 

I ruled out Capture One, Aftershot Pro, and SilkyPix pretty quickly due to interface issues (no particular issues here, I just didn't like them).  They may well have some excellent features but I never got over the interface with them.  C1 in particular has a lot of followers, so don't let my tastes dissuade you from trying it.   RawTherapee appears to be very easy to learn, yet I have not mastered it in months of trying.  DPP4 is much improved over DPP3, but still not perfect. 

Photivo was trickier to learn, but I spent quite a bit of time with it. I found that by default you have to click a button to get the changes you made to execute.  It is quite slow in operation, but I like the interface. Too bad it doesn't appear to be actively developed anymore, and had the color space issues.  

At first, I didn't like the Photo Ninja interface that much, but a friend encouraged me to try it again, and patiently answered my questions.  Also, once I bothered to look, I found the help/instructions very clear and concise. After a little use, I learned to love how Photo Ninja operates. My favorite feature is the ability (in most contexts) to click between zooming to 100% and full-image views. That alone puts the usability of PN well above all the others.  PN has fewer options than some raw converters, but it has everything I care about; if I need more (such as selective sharpening, or dodging/burning, etc), I send the tiff to an editor.  PN is fast too.  I'm excited to see what the next major release looks like.

Summary

So in the end, I settled on two:  DPP and Photo Ninja.  I prefer Photo Ninja for nearly everything because DPP4 tends to overdo the contrast and saturation by default (where DPP3 was one of the most accurate converters on default settings).  I keep DPP around only because I found one example where Photo Ninja changed the color too much.  Also, DPP is slower than Photo Ninja, and DPP4 does not support my older images from older cameras, so I have both DPP3 and 4 installed.

Having used Photo Ninja for some months now, I like it more and more.  I found a bug related to my camera, and Picturecode listened, fixed the bug within a couple of days, had me test it further, and finally released a new version.  Name a big company that can do that!  They are very responsive to feedback.  Sometimes, they said "great idea, we'll work on that for the next release".  Sometimes, they pointed me to the manual.  But they always responded quickly and politely, and they always backed up their decisions with sound reasoning. They earned my respect and loyalty. The more I use it, the more I like it.

I mentioned not caring much about sharpening at the conversion step... but that has changed with Photo Ninja.  I actually use Photo Ninja's sharpening, often keeping the default settings.  I'm not sure how their algorithm works, but it avoids artifacts and halos very well, and sharpens on par with the best.  The only time I turn it off is when I need selective sharpening via masks/layers.

I like Photo Ninja so much that I barely use anything else.  I will sometimes use Photoshop for selective sharpening or dodging/burning, but now mostly it gets used for resizing images.  Once Photo Ninja improves the resizing feature, I feel I will use Photoshop even less, perhaps for just a handful of images per year.

-----

Update:  After all of the above, I found digiKam is available for Windows, and tried the raw conversion.  First impression is that it doesn't handle highlights any better than DarkTable or Lightzone.  I'll have to experiment with settings.

Update:  I keep reading great things about Iridient Developer.  When that becomes available for Windows and Linux, I'll try it.

Update:  I found a Windows version of DarkTable 2 on Partha's site, and found that version runs pretty quickly.  I'm still not a fan of having to import images and store changes in a database, nor do I like the sliders, but the quality has improved quite a bit and I'd say it is worth another look.

Update:  A friend pointed me to yet another free raw converter, Photoflow.  As of this update, it is in an early stage (0.2.6), but shows some promise in both quality and usability.

Modifying a centerpost to get your tripod lower

I used a fairly good, inexpensive aluminum tripod for many years.  It was stable enough under most conditions (especially with the legs not extended... this is common for me as I shoot a lot of closeups).  But as I got better gear, longer lenses, became pickier about sharpness and so forth, I decided it was time to both cut the weight and increase the steadiness.  I had read a lot of good things about carbon fiber tripods.  I did some research, including hands-on visits to the local store, and became convinced it would be a significant upgrade over the old tripod.  I picked the Gitzo 3530 because it had similar size/dimensions to my older tripod, which fit me well.  I was completely underwhelmed when I opened the box because it looked so similar to the old tripod, but I was astounded by the difference in quality.  Night and day really.  When I had my 300mm mounted on the aluminum tripod, legs fully extended, I could tap a leg and watch it wobble in the viewfinder... literally for seconds.  The Gitzo, under the same conditions, didn't budge.  No wobble whatsoever.  You can see vibration from the tap, but it stops immediately.  So I recommend a carbon fiber for anyone, regardless of the size tripod you need.

Gitzo has many models designed for many uses.  I wanted one that would do just about everything, from going to ground level, to fitting me standing up, while supporting my telephoto lenses.  Now, in a properly fitted tripod, when it is fully extended, you should not need the centerpost to look through the viewfinder.  No stooping, no stretching... with a head and camera mounted, it should just work for you.

The only problem is, the centerpost of the 3530 is way too long to get to ground level.  My old tripod had a split centerpost... you could use just a short part of it if you didn't need or want all 18" of it. Gitzo makes a number of models without centerposts, but, as I do a lot of closeups, I find a bit of centerpost adjustment very convenient, much easier than adjusting the legs (In closeup work, a tiny movement is a huge change in composition).  Gitzo's solution is to allow the user to remove the centerpost entirely.  The 3530 has a hook on the bottom of the post, and that can attach directly to the mounting plate.  It works, but it isn't convenient... you either have no vertical adjustment, or you have to take it apart in the field.  Gitzo sells short centerposts... but after spending over $600 (USD), I was reluctant to spend another $100 on another part.

I decided to cut the post to fit.

First, I measured how much centerpost I would actually use in the most extreme of situations, like standing up with the camera aimed skyward.  I found 8" (5" of travel) would do the trick, while still letting me get as close to ground level as I'd done with the old tripod.  Please don't assume my numbers will work for you... anyone who does this will need to make their own measurements. Measure twice, cut once. Obviously, once you make the cut, that's it.  By the way, carbon fiber is very easy to cut.

I didn't want to lose the hook, or lose the ability to remove the centerpost entirely.  There is a mount at the bottom of the centerpost where the hook screws in, and it is firmly epoxied to the interior of the centerpost.  I had to remove the epoxied part that was stuck to the mount by sanding it off the mount, which took some time and patience.  Once done, I simply epoxied the mount into the bottom of the shortened post.  It fits perfectly, and almost looks professional (I can see a hint of the white epoxy I used).  It seems to be just as strong as the original.   I can still remove the centerpost entirely if I want to get lower, I still have the hook, and I have all the centerpost I need.

Some say having a model without a centerpost makes the tripod more stable.  I have not noticed any problems in using the centerpost even at 1:1 magnification, or with a 400mm telephoto. I also have not personally seen any physical evidence that a centerpost, lowered all the way, is any less stable than a flat plate or a leveling base.  If someone learns of such evidence, please point me to it, I'd love to see it.    Gitzo tripods are well-built and the carbon fiber is excellent at absorbing vibrations.  As I write this, I've had the 3530 for over 8 years and it is still solid.

Review of the Kirk BH-1 ballhead

I've read some mixed comments online about the Kirk BH-1, and thought it was time to share my experience the ballhead.

I bought the Kirk BH-1 in early 2003. I've had it more than long enough to know it well, and to have given it a few dings and wear off a bit of finish. It works just like it did the day I unwrapped it, even if it isn't quite as nice looking. Strong, solid, smooth. I have 100% confidence that it will hold anything I can put on it. In a nutshell, it works very well and I like it. I have never regretted the purchase. It works and doesn't get in my way; I give it no thought in use and that's the way it should be. I've had other heads that would shift, slip, or poke me, so having something so well made is wonderful. My version is old enough that Kirk changed the clamp design, but I'm not sure if anything else is different vs the current model.


Prior to the BH-1, I had a Bogen/Manfrotto 3038 heavy ballhead. The 3038 was very strong, but not smooth, and so heavy that I did not carry my tripod as often as I should (the 3038 head weighed 4 lbs alone). The raves about Arca-Swiss style heads convinced me to upgrade.

One of the reasons I picked the Kirk over other models (such as the Arca-Swiss B1), was the orientation of the drop notch. Many competing models had the controls on the wrong side relative to the drop notch. I hold the camera with my right hand, so I want the ballhead controls easily usable with my left, with the drop notch opposite from me. I shoot a lot of closeups, and end up aiming down frequently. Only subsequent to my purchase have other brands followed that model.

Also, around the time I bought the BH-1, the Arca-Swiss B1 was notorious for having lockup problems. My Kirk BH-1 has never had a single problem in operation, and I've used it in every type of weather. As I'm sure most of you know, Arca-Swiss has since resolved the lockup issue.

At 2 lbs, the BH-1 is half the weight of my old Bogen, much smoother, and though I didn't want to admit it, the plates are much easier to deal with than the Bogen hex plates. For the life of me, I cannot understand why Manfrotto has not completely switched to A-S plates (As of 2013, they support a number of quick release systems). With all the more recent advances in ballheads since I bought mine, 2 lbs probably sounds heavy to a lot of people, but the weight certainly falls into an acceptable range where I don't mind hiking with it.

My model is old enough that the clamp does not have any provision for safety stops, nor a level. I simply have to make sure I clamp it down properly. I have a knob release (I am not sure levers existed when I bought it). I have not had any accidents, the clamp is simple and strong.

How strong is it? Once locked, the BH-1 doesn't budge, not one bit. There is zero creep (though there is settling as I let go, but that is tripod flex due to my input; like in all such systems, this is expected and normal). I have never seen a single movement while locked down in 10 years of use. Odd angles? I'd be more concerned about the tripod tipping over than creep. I've had up to a 400mm f/4 on it and it gives just as much confidence with that gear as it does with a compact setup like a Minolta XD-11 with a 50mm (yes, I was shooting film when I bought the BH-1). I've never even stressed the BH-1. Current models are rated at 50 lbs, but I don't recall seeing a rating when I bought mine. Photographers with heavier gear than mine were using this head when I bought it, so I wasn't worried.

How smooth is it? When the tension is on the looser side, it is quite smooth. It beats nearly everything else I have personally used. Only my Arca-Swiss Z1 beats it, but not by much. A number of other reviews I've read claim that there are a few models that are smoother, but if true, I'd say it isn't a concern if you use the ball loose and lock it down tight. If you use your ballhead loose, you'll be happy. I read one review that said the BH-1 is not smooth. All I can say is, my 10 year old model is smooth. That reviewer might have a lemon. However, the BH-1 isn't as nice when the tension is set fairly tight, and clearly the ball isn't as perfectly round as one might expect. As you move the ball around, the resistance increases and decreases, but it is still smooth.

For years, I simply left the tension setting fairly loose, relying on the main knob to tighten the ball. I never gave the tension knob any thought. More recently, I've read about people setting tension on their ballheads so that the ball does not slip even when the main knob is loose. I tried this recently, and found it just isn't workable on my BH-1. The tension knob requires several complete revolutions to go from completely loose to completely tight (so tight you can't move a thing). But the transition from loose to tight is very very short and sudden, and I have not found that "just so" tension setting. The tension control knob is not marked and not indexed, and it is also very easy to turn. My kids change the tension on me all the time. As a result, I expect some of you will decide to pass on the Kirk. This is the one part that Kirk could really stand to improve (maybe they did?). For my use it isn't an issue. FWIW, a close friend has a Really Right Stuff BH-55 and says the tension isn't very workable on that model either. Only the Markins and Arca-Swiss users seem to rely on that feature.

Also, with the tension set fairly high, I found that the BH-1 ball will shift when I tighten the main control, changing the composition (not just settling), depending on the angle. In doing closeups, this is unacceptable, so I just keep it loose. I can't tell you if that is just my copy, or a common design issue. I've read of this shifting/pulling with other brands too. I get the feeling that only a couple of the very highest end ballheads minimize this issue.

The panning knob just works. Loosen it to pan or adjust the location of the drop-notch, tighten it. It moves smoothly and locks tightly. I've carried it over my shoulder with a camera mounted and it has never come loose. No worries.

The bottom line is, this ballhead holds my camera steady with every piece of gear I've ever owned. The BH-1 isn't fancy, but it is a workhorse. It works well enough that I generally don't have to think about it when I use it, which is as it should be. Compared to previous heads I've used, that was a first.

Update:  After I wrote all this, dpreview came out with a very nice test of similar large ballheads. Unfortunately, Kirk wasn't included in this test: Battle of the Titans

Thoughts on a few quick-release clamps

I converted to an Arca-Swiss style ballhead and quick-release system over 10 years ago. As most of you know, this style is a dovetail design and relies on friction to hold a plate in a channel.  When I first started reading about them and took a look, I admit I was nervous about the plates sliding out of the sides.  Once I tried one, I was hooked on them and lost my concerns.  Given a properly-sized plate, they clamp down tightly and are completely secure.

Here are my thoughts on the few clamps I have tried.

Kirk (old style) screw-knob:

The first such clamp I ever used was a simple screw-knob type that came with my Kirk BH-1.  It is a very simple but strong design.  It takes a few turns to lock, but as it tightens, you can feel it grip the plate and you know it is secure.   My model is over 10 years old, and came with no safety stops... no pins, no channels as you find in more modern clamps.  But honestly, it doesn't need it.  Such things are for peace of mind only.  I have tried to push out the plates and was unable to budge them.  This clamp is more than strong enough for any application I have.  I love the large knurled design of the knob; very easy to grip even with gloves.

I have only two gripes with this older Kirk clamp (and they are nitpicks):

First is the length of the knob.  If you use the clamp with the knob pointing back at you, it can poke you in the face.  To be fair, this is common to most screw-knob clamps.  It is apparently a deliberate design decision; I have been told they are long to accommodate more plate styles, but I don't use anything that requires it.  To avoid being poked, I think most people use the knob on the other side, sticking out under the lens.  My old film body was short and the lens was always too close to the knob for comfort, so I solved the problem by using a square plate on the camera body and oriented the knob to the left side.  That worked for me for years until a friend convinced me of the benefits of an L-bracket.  Being poked in the face isn't a problem with larger DSLRs!

My second gripe is the speed of the clamp; it takes a few turns to tighten/loosen the clamp.  This wasn't an issue until I finally bought an L-bracket, and I wanted to switch orientations on the bracket more often.  One purchase leads to another, and the L-bracket got me looking at other clamp designs.

Kirk (new style) fast screw-knob:

The image is from Kirk's website.

Since I'd had such good luck with Kirk and thought I'd prefer a screw knob, I tried Kirk's newer fast speed screw knob.  I didn't like it, right from the start.  It didn't take much of a turn to unlock it, and didn't provide quite the same feedback as my slower screw during tightening.  It's faster, but it just didn't feel secure to me.  Also, I noticed that the clamp pushes the plate out of level when tightened, making the level totally useless.  The new Kirk clamp has channels that act as a safety catch when used with plates that have safety screws on the bottom.  And finally, I didn't like the more-rounded knob; it is harder to grip.

Acratech screw knob clamp:

The image is from Acratech's site

A friend of mine has an Acratech GP, which comes with a choice of either a lever clamp or a screw knob.  My friend has the double-speed screw knob. It has a nice knob and a quality feel to it.  I liked it better than the Kirk fast model, but it still doesn't provide the tactile feedback of my older slow screw knob.  My friend's clamp comes with a safety pin that will catch in the bottom of most plates and will help stop a plate from sliding out if it is partially loosened.

Markins lever clamp:

The Markins lever is nicely made with a quality feel.  It came with a Q20i ballhead I rented.  It is the first lever I tried and it was much nicer than I expected.  I appreciate the speed of locking and unlocking. It requires a bit of force and I don't see it opening by mistake too easily, but you could in theory catch the end of the lever on something.   My only frustration is that apparently my older plates have inconsistent widths and one of them wasn't totally tight.  I was able to push the plate out of the clamp with thumb pressure.  The fix is to get plates from one maker that are all the same width, and adjust it properly.   The Markins has a pin like the Acratech model to act as a safety stop with virtually any plates.

I also don't see the point of a level that is hidden under your mounted camera.  To use it, you have to level the clamp before you mount the camera.

Really Right Stuff lever clamp:

This is the clamp I ended up keeping.  Many people rave about RRS gear and now I understand why. I didn't expect to like lever clamps but RRS changed my mind.  I have the B2 LR II, which, as it was made after 2012, has a self-adjusting design that holds each of my varied plates securely.  I cannot push my thinnest plate out of the clamp they way I could with the Markins clamp.  Every plate (all Kirk plates) I own is 100% secure in this clamp.  I'm not saying every plate ever made will work, just that all of my Kirk plates work.

The lever wraps around the edge of the clamp and always ends up under your camera or lens, giving it more protection from an accidental tug (which requires a fair amount of force anyway).   The safety mechanism is the same as the new Kirk clamp; channels which require screws on the plates to stop an accidental slide.   The build quality is excellent; it feels beefy and secure in use.  While I would like an extra lock on the lever for my own peace of mind, I don't think it really needs one.  In actual use, I never give it any thought; I just know it is secure.

It has a scale on both sides of the clamp with marks every 1mm.  However, my L-bracket is fat enough that it covers most of the marks.  I can see the larger marks, just not every 1mm.

General observations:

A brand I would like to try, but have never had a chance, is Hejnar.  I like the short knob versions.

Another clamp design that looks interesting, but does not fit my Z1, is FLM's SRB-60 screw knob clamp.

In screw knob clamps, I found a trade-off between speed and my sense of security.  I'd rather feel secure.

One of the benefits of the lever clamps (this applies to both Markins and RRS, and a few other brands) is that the lever is low-profile, not jutting out above or below the clamp itself.  I can orient the RRS clamp in nearly every direction in my ballhead without hitting anything (it barely touches the base when the lever side is down in the drop notch, but this isn't a problem in practice).  Screw-knobs can hit the sides, base, or other controls on some heads, making some orientations awkward in use.  An L-bracket obviates most of those issues when they occur. 

On a monopod, I prefer a slow screw knob like my old Kirk clamp.  I think it is easier to tighten in that situation.

On a tripod, since I use an L-bracket, I like the speed of the lever.  If I didn't use an L-bracket, I would not care either way. 

What works for you is a matter of preference.